• Products
  • Cold Forming Aluminum Foil
  • Tropical Blister Fold
  • Pharmaceutical PTP Foil
  • News
  • Company News
  • Industry News
  • Honors
  • Feedback
  • Contact Us
  • 新闻中心


    Industry News


    Current Location:首页/Home > English > News > Industry News

    Reasons for failure of the composite film


    1. Extruder temperature set properly, especially the die and the resin temperature is too low, resulting in poor resin plastics, PE composite film of molten resin or a similar phenomenon occurs sharkskin fisheye-like scar.
    2. Resin contains water, plasticizing condition resin.
    3. Entering into the resin melt index or other resins with different densities, the resin plastics or plastics are not entirely bad.
    4. Not thoroughly cleaned when changing the cartridge clean resin, other resins or impurities remaining in the cylinder adversely affect the resin plasticized condition.